Datasensing
Home > Products > Sensors > Inductive sensors > Cylindrical sensors > Basic > 95B064510

Basic

95B064510

IS-30-C0-S2
Inductive Proximity Sensor ø30 standard - non flush 15 mm - conf. pnp/npn no/nc 4 wires - M12

Non-contact detection Cost effective and reliable detection of any metal part

Overview

  • Standard proximity M4, M5, M8, M12, M18, M30
  • Double range (i.e. M12 4mm, M18 14mm, M30
    • 20mm)
  • Unshielded or shielded models for flush mounting
  • Nickel brass or stainless steel short and long
    • housing
  • Ecolab and Diversey certifications for industrial
    • detergents
  • Multi-voltage, Metal face, Weld field immune models
  • NO/NC, NPN or PNP output and programmable
    • versions.

Technical Features

Detection properties
Nominal sensing distance 15mm
Operanting distance 0…12,1mm
Standard target 45x45mm FE360
Correction Factor copper: 0,4…0,5 / aluminium: 0,4…0,6 / brass: 0,5…0,7 / stainelss steel: 0,7…1,05
Repeat Accuracy < 3% (UB 24V Ta=23°C ±5°C)
Hysteresis < 10%
Application
Description M30 standard no-flush mount
Functions Proximity
Outputs
Output type NPN/PNP
Output Function NO/NC
Switching frequency 300Hz
Response time 1,7
Electrical data
Operating Voltage 10...30Vdc
No-Load supply current ≤ 10mA
Load current 200mA
Output voltage drop ≤ 1,8V @100mA
Max ripple content ≤ 10%
LED indicators Yellow LED output state
Time delay before availability ≤ 50ms
Short-circuit protection Yes
Reverse Polarity Protection Yes
Emission ≥100kHz
Protection against inductive loads Yes
Mechanical data
Mounting Unshielded
Dimensions Ø30x85
Housing Material Nickel-plated brass
Connections M12 Plug
Active Head Material LCP
Tightening torque 40Nm
Material Nickel-plated brass
Diameter/Dimension M30
Test/Approvals
Approvals CE cULus ECOLAB DIVERSEY
Accessories
Supplied Accessories 2 nuts M30x1.5
Generical Data
Dimensions Ø30 / L = 85mm
Operating Temperature -25°C…+70°C
Mechanical Protection IP67

Downloads for IS-30-C0-S2